全国服务热线
手机: 133-1302-8229
工具条

扫一扫,打开手机网站
工具条

扫一扫,加微信咨询

返回顶部
新闻动态
为什么要使五莲花路沿石表面变得光滑
1.酸性:有时我们可以利用酸性阜新路边石哪家好物质,将石材处理成光滑的状态,缺点是处理表面有腐蚀的迹象,优点是经过处理的外观要比磨光面更加朴素一些。
1. Acidity: sometimes we can use the good material of acid Fuxin curbstone to treat the stone into a smooth state. The disadvantage is that there are signs of corrosion on the treated surface. The advantage is that the treated appearance is more simple than the polished surface.
2.开裂方法:要比火烧面更加粗糙,建议不要采取这种方法,这种方法主要用于矿山錾以露出石头自然的开裂面时使用,还可以将它用于手工切割。
2. cracking method: it should be coarser than the fire surface. It is not recommended to adopt this method. This method is mainly used when the mine chisels to expose the natural cracking surface of the stone, and it can also be used for manual cutting.
3.火烧方法:这种方法主要用于大型商业室内装饰时使用,优点是处理后五莲花路沿石饰面粗糙,具有较好的防滑效果。
3. Burning method: this method is mainly used in large-scale commercial interior decoration. The advantage is that the stone facing of wulihualu road is rough after treatment, and it has good anti-skid effect.
4.抛光方法:这也是五莲花路沿石较常使用的处理表面光滑方法之一,这种方法主要的优点是简单、方便、并且饰面刮痕不明显,是值得提倡的方法之一。
4. Polishing method: it is also one of the more commonly used methods to treat the smooth surface of wulianhua road curb. The main advantages of this method are simple, convenient, and the surface scratch is not obvious, which is one of the methods worth advocating.

联系方式

  1. 保定路沿石模具加工厂
  2. 电话:xxx
  3. 手机:xxx
  4. 手机:xxx
  5. 联系人:xxx
  6. 地址:xxx

版权 © 保定路沿石模具加工厂 网址:mojusl.37ix.com.cn  推荐:路沿石模具,安全岛模具,路平石模具,挡渣块模具

友链:螺杆启闭机 检查井钢模具 玻璃钢拍门 网站建设及优化保定遨游网络公司